Fanless ETX module targets industrial applications  

Posted by Daniela Mehler

Fanless ETX module targets industrial applications

Avalue is shipping a module using Kontron's ETX "computer-on-module" form-factor, targeting industrial applications. The Linux-compatible ESM-910ETX supports dual-channel LVDS for simultaneous display from two sources, has an Intel Celeron M processor clocked at 600MHz, and uses dual-channel DDR2 memory, the company says.

(Click for larger view of the ESM-910ETX)

Touted as an upgrade replacement for previous modules that were based on Intel's 852GM chipset, the ESM-910ETX offers higher component integration, greater bandwidth, and better power efficiency than these older designs, claims Taiwan-based Avalue. Applications are said to include industrial automation, medical, transportation, measurement, point-of-sale (POS), kiosk, thin client, and digital control devices.

The fanless ESM-910ETX uses Intel's 910GMLE chipset, which supports dual-channel DDR2 400MHz system memory. The use of DDR2 RAM improves peak memory bandwidth by over 20 percent, and reduces memory power consumption by 50 percent, claims Avalue.

The 4.5 x 3.7-inch ESM-910ETX adheres to Kontron's familiar ETX format, and apparently complies with the ETX 3.0 revision, since it incorporates dual SATA ports. The device also includes a 600MHz Intel Celeron processor, four USB 2.0 ports, and dual serial ports.

Features listed for the ESM-910ETX by Avalue include the following:Processor -- Intel Celeron M 600MHz or Intel uFC-BGA 479 Celeron M 600MHz; 512K L2 cache
Chipset -- Intel 910GMLE with ICH6-M
Memory -- 200-pin SODIMM socket, supporting up to 1GB DDR2 333/400MHz SDRAM
Display memory -- Intel DVMT 3.0, supporting up to 128MB video memory
Display resolution -- CRT mode 2048 x 1536 @ 16bpp (75Hz); LCD/simultaneous mode 1600 x 1200 @16bpp (60Hz)
LVDS – dual-channel 18/24-bit LVDS
Audio -- Intel NH82801FBN ICH6-M with Realtek ALC203 AC97 codec; line in, line out, and Mic in
Expansion -- 4 x PCI; 1 x ISA
Networking -- 10/100Mbps (Realtek 8101E)
USB -- 4 x USB 2.0 ports
Serial -- 2 x TTL serial
IrDA – 115Kbps, IrDA 1.0 compliant
Storage I/O -- 2 x SATA; 1 x EIDE (Ultra DMA 100); 1 x FDD/LPT
Watchdog timer -- Reset 1 sec. to about 255 min.
Dimensions -- 4.5 x 3.7 inches (114 x 95mm); ETX format
Operating temperature -- 32 to 140 degrees F (0 to 60 degrees C)
Operating system -- Linux, Windows CE, Windows XP Embedded (XPe), Availability

The ESM-910ETX appears to be available now for an undisclosed price. More information may be found here.


Fanless touchpanels run Linux
COM Express module gets low-power options
MTV Laying TRL to Rest
(E! Online)

This entry was posted on 9:55 AM .